Contributors mailing list archives
Re: Manufacturing advice needed - materials of measured units being consumed partiallyby
LuNel, Inc, James Dominy
I would track your rolls of cable using Lots, this way when the order calls for 25, 50, or 100 m of cable if the lot does not have the qty needed to produce the ethernet cable it will use the lot that has enough for the finished product.
On Wed, Jan 26, 2022 at 3:57 PM Radovan Skolnik <firstname.lastname@example.org> wrote:
Daniel, thank you for answer. Yes it does make sense. But will it cover scenario where I have let's say 2 rolls with 50m remaining on each and I want to produce 100m final cable? Because in such case a completely new roll should be ordered as I cannot join those 2 50m pieces together... So it comes to a requirement here that you just do not track the total number of meters remaining but you need to track each roll individually. Similar example would be a woodmaker who needs certain sizes of wood for various products (chair, table, ...) and he procures wood in 3m planks. What is your opinion? Best regards Radovan On streda 26. januára 2022 21:51:47 CET Daniel Reis wrote: > I believe you need to use different Units of Measure (UoM). > In this case, the "Cable" Product is purchased in "Rolls" and used > in "Meters". > The "Roll" UoM should be configured to convert to Meters at a rate > of 1:1000. > This way you track your cable stock in meters available, and you > order to your supplier in rolls. > Dos this make sense? > Thanks > Daniel > > On 26/01/22 20:37, Radovan Skolnik > wrote: > > Hello, > sorry for asking stupid questions here but I hope someone can provide some > wisdom here that I am missing. Let's imagine this scenario: I produce > Ethernet cables of various lengths - i.e. 25m, 50m, 75m, 100m, ... Each > such final cable requires 2 connectors and that particular amount of "raw" > cable. I can only buy raw cable in rolls of 1000m. So when I buy a new roll > and produce one final 50m cable, 950m of raw cable remains. When I produce > another of 100m length, 850m of raw cable remains. When my remaining raw > cable on certain roll is 50m I cannot produce 100m final cable and need to > order another raw cable roll. So the idea is tracking remaining quantity of > somethings (products? lots? ...) that is bought at certain size and is > being gradually consumed. There can of course be more of these (i.e. I have > bought 3 rolls at the same time). Is there a way on how to model this? > Manufacturing is not really my domain and looking through code of various > modules I didn't find anything that would resemble such thing. Thank you > very much. Best regards > Radovan Skolnik > > > _______________________________________________ > Mailing-List: https://odoo-community.org/groups/contributors-15  > Post to: mailto:email@example.com  > Unsubscribe: https://odoo-community.org/groups?unsubscribe  > > > > -- > DANIEL > REIS* > MANAGING DIRECTOR > M:* > +351 919 991 307 > E:* > dreis@OpenSourceIntegrators.com  > A:* > Avenida da República 3000, Estoril Office B, #34 > > > None  None  None  > > > _______________________________________________ > Mailing-List: https://odoo-community.org/groups/contributors-15  > Post to: mailto:firstname.lastname@example.org > Unsubscribe: https://odoo-community.org/groups?unsubscribe  > > > >  https://odoo-community.org/groups/contributors-15 >  mailto:email@example.com >  https://odoo-community.org/groups?unsubscribe >  mailto:dreis@OpenSourceIntegrators.com >  https://www.magentointegrators.com/ >  https://www.hadoopintegrators.com/ >  https://www.usaodoo.com/ >  https://odoo-community.org/groups/contributors-15 >  https://odoo-community.org/groups?unsubscribe