Contributors mailing list archives

contributors@odoo-community.org

Avatar

Re: Manufacturing advice needed - materials of measured units being consumed partially

by
Landis Arnold
- 26/01/2022 22:54:02
Radovan,
One scenario would be to use 
1 Roll  (=1000m, or 10,000cm) does not mater - it is one roll.

Your 100m final cable would require at least (.1 Roll).  It cannot be made from 2 pieces of 50m (or .05 and .05)
I would reduce the 1000m down to 100 m pieces  (1pc 100m cable), or simply down to any "length" you have as a Piece.
Your BOM requires 1 single piece of 100m or more and cannot be comprised of 2 x 50m piece.

(of course you could splice them, but that is not the conversation)

The main concept is you are not stocking "per meter" but are instead stocking "per piece/roll what have you)

The same process could go towards any finished length and start with any roll size, but the concept is you are still boiling down to a usble piece.  You may have some scrap if you are using odd numbers like 13m for instance.

Likely a more elegant solution but my thought about it just now
Good luck,

Landis Arnold

Nomadic Inc,
Colorado USA

From: "Radovan Skolnik" <radovan@skolnik.info>
To: "Odoo Community Association, (OCA) Contributors" <contributors@odoo-community.org>
Sent: Wednesday, January 26, 2022 2:57:00 PM
Subject: Re: Manufacturing advice needed - materials of measured units being consumed partially

Daniel,

thank you for answer. Yes it does make sense. But will it cover scenario where I have let's say 2 rolls with 50m remaining on each and I want to produce 100m final cable? Because in such case a completely new roll should be ordered as I cannot join those 2 50m pieces together... So it comes to a requirement here that you just do not track the total number of meters remaining but you need to track each roll individually. Similar example would be a woodmaker who needs certain sizes of wood for various products (chair, table, ...) and he procures wood in 3m planks. What is your opinion?

Best regards

	Radovan

On streda 26. januára 2022 21:51:47 CET Daniel Reis wrote:


> I believe you need to use different Units of Measure (UoM).


> In this case, the "Cable" Product is purchased in "Rolls" and used


> in "Meters".


> The "Roll" UoM should be configured to convert to Meters at a rate


> of 1:1000.


> This way you track your cable stock in meters available, and you


> order to your supplier in rolls.


> Dos this make sense?


> Thanks


> Daniel


> 


> On 26/01/22 20:37, Radovan Skolnik


> wrote:


> 


> Hello,


> sorry for asking stupid questions here but I hope someone can provide some


> wisdom here that I am missing. Let's imagine this scenario: I produce


> Ethernet cables of various lengths - i.e. 25m, 50m, 75m, 100m, ... Each


> such final cable requires 2 connectors and that particular amount of "raw"


> cable. I can only buy raw cable in rolls of 1000m. So when I buy a new roll


> and produce one final 50m cable, 950m of raw cable remains. When I produce


> another of 100m length, 850m of raw cable remains. When my remaining raw


> cable on certain roll is 50m I cannot produce 100m final cable and need to


> order another raw cable roll. So the idea is tracking remaining quantity of


> somethings (products? lots? ...) that is bought at certain size and is


> being gradually consumed. There can of course be more of these (i.e. I have


> bought 3 rolls at the same time). Is there a way on how to model this?


> Manufacturing is not really my domain and looking through code of various


> modules I didn't find anything that would resemble such thing. Thank you


> very much. Best regards


> Radovan Skolnik


> 


> 


> _______________________________________________


> Mailing-List: https://odoo-community.org/groups/contributors-15 [1]


> Post to: mailto:contributors@odoo-community.org [2]


> Unsubscribe: https://odoo-community.org/groups?unsubscribe [3]


> 


> 


> 


> --


> DANIEL


> REIS*


> MANAGING DIRECTOR


> M:*


> +351 919 991 307


> E:*


> dreis@OpenSourceIntegrators.com [4]


> A:*


> Avenida da República 3000, Estoril Office B, #34


> 


> 


> None [5]  None [6]  None [7]


> 


> 


> _______________________________________________


> Mailing-List: https://odoo-community.org/groups/contributors-15 [8]


> Post to: mailto:contributors@odoo-community.org


> Unsubscribe: https://odoo-community.org/groups?unsubscribe [9]


> 


> 


> 


> [1] https://odoo-community.org/groups/contributors-15


> [2] mailto:contributors@odoo-community.org


> [3] https://odoo-community.org/groups?unsubscribe


> [4] mailto:dreis@OpenSourceIntegrators.com


> [5] https://www.magentointegrators.com/


> [6] https://www.hadoopintegrators.com/


> [7] https://www.usaodoo.com/


> [8] https://odoo-community.org/groups/contributors-15


> [9] https://odoo-community.org/groups?unsubscribe




_______________________________________________
Mailing-List: https://odoo-community.org/groups/contributors-15
Post to: mailto:contributors@odoo-community.org
Unsubscribe: https://odoo-community.org/groups?unsubscribe


Reference