- Mailing Lists
- Contributors
- AW: Mounting location of part upon production
Contributors mailing list archives
contributors@odoo-community.org
Browse archives
- By thread
-
By date
- October 2024 41
- September 2024 62
- August 2024 70
- July 2024 104
- June 2024 160
- May 2024 40
- April 2024 63
- March 2024 104
- February 2024 111
- January 2024 75
- December 2023 46
- November 2023 94
- October 2023 101
- September 2023 91
- August 2023 103
- July 2023 64
- June 2023 92
- May 2023 69
- April 2023 47
- March 2023 106
- February 2023 49
- January 2023 93
- December 2022 50
- November 2022 39
- October 2022 152
- September 2022 73
- August 2022 38
- July 2022 141
- June 2022 87
- May 2022 59
- April 2022 31
- March 2022 68
- February 2022 77
- January 2022 98
- December 2021 75
- November 2021 74
- October 2021 66
- September 2021 68
- August 2021 50
- July 2021 123
- June 2021 86
- May 2021 90
- April 2021 73
- March 2021 146
- February 2021 87
- January 2021 38
- December 2020 159
- November 2020 100
- October 2020 277
- September 2020 193
- August 2020 94
- July 2020 85
- June 2020 158
- May 2020 50
- April 2020 172
- March 2020 121
- February 2020 210
- January 2020 58
- December 2019 35
- November 2019 97
- October 2019 165
- September 2019 118
- August 2019 86
- July 2019 56
- June 2019 124
- May 2019 77
- April 2019 84
- March 2019 64
- February 2019 53
- January 2019 80
- December 2018 64
- November 2018 31
- October 2018 55
- September 2018 69
- August 2018 28
- July 2018 52
- June 2018 34
- May 2018 81
- April 2018 98
- March 2018 47
- February 2018 77
- January 2018 70
- December 2017 64
- November 2017 159
- October 2017 118
- September 2017 161
- August 2017 18
- July 2017 41
- June 2017 56
- May 2017 106
- April 2017 110
- March 2017 112
- February 2017 69
- January 2017 94
- December 2016 115
- November 2016 132
- October 2016 264
- September 2016 124
- August 2016 143
- July 2016 44
- June 2016 137
- May 2016 84
- April 2016 80
- March 2016 130
- February 2016 98
- January 2016 109
- December 2015 140
- November 2015 189
- October 2015 335
- September 2015 136
- August 2015 208
- July 2015 43
- June 2015 64
- May 2015 8
AW: Mounting location of part upon production
byAW: Mounting location of part upon production
Hey,
I would give a unique number to every product in stock and put this number in a bar code on the product for witch you need this mounting location.
Your worker scans the final product ( the chair ) from the work order and he takes the first leg, scans it and put it first position given by the work order. So he can take the legs out the box without any worry and you knows exact with leg is in with position. And it is simple for the worker, taking him little time ( just scan each leg ) and it is not hard to code. Only maybe the work order that have to automaticaly give the positions and write the leg number on the work order ( here I have no experians -) ).
With kind regards,
Van Hirtum Johan
-----Oorspronkelijk bericht-----
Afzender: Daniel Reis <notifications@odoo-community.org>
Verstuurd: Maandag 5 Februari 2024 16:02
Aan: Contributors <contributors@odoo-community.org>
Onderwerp: Re: Mounting location of part upon production
Hi Tom,
Option 2 will be problematic as it introduces artificial restrictions on component usage.
Option 3 looks similar to Lot/Serial usage. What if you (ab)used Lot numbers for this?
On 05/02/2024 11:57, Tom Blauwendraat wrote:Hello, I'm dealing with a situation where upon production, the mounting location of the parts needs to be registered. Imagine a chair with 4 identical legs, but it needs to be registered which leg is placed where: front right, front left, rear right or rear left. Is there something for this case in Odoo? What I could come up with is: - Requiring work orders for "leg mounting", and specifying the mount location on the work order - Having separate products eg "Left rear leg" and producing these from "Leg" (seems a bit of a hassle) - Adding a required field on stock move line in case certain products are produced, where the mount location is filled in; also enforce 1.0 as a quantity - ... -Tom_______________________________________________
Mailing-List: https://odoo-community.org/groups/contributors-15
Post to: mailto:contributors@odoo-community.org
Unsubscribe: https://odoo-community.org/groups?unsubscribe
--
DANIEL REIS
MANAGING PARTNERM: +351 919 991 307
E: dreis@OpenSourceIntegrators.com
A: Avenida da República 3000, Estoril Office B, 3º Escr.34, 2649-517 Cascais_______________________________________________
Mailing-List: https://odoo-community.org/groups/contributors-15
Post to: mailto:contributors@odoo-community.org
Unsubscribe: https://odoo-community.org/groups?unsubscribe